Sign up for New Product alerts
Our products move quickly! In order not to miss out, subscribe below to be notified by email whenever Enegis adds new products.
Subscription is free and you can unsubscribe at any time. See an example notification.
Phone:
01789 205132 | 07721 442979
Email:
info@enegis.co.uk
H-835 Tub Grinder
The H835 tub grinder is an ideal machine to pre chop long fibre for on farm use. It is fitted with the same proven governor control as fitted on the larger Haybuster machines. See further details and images below, and download a brochure.
H1000 Tub Grinder
The Haybuster PTO Tub Grinder line is made up of three sizes of grinders plus the option of an electric motor. The Haybuster Model H-1000 tub grinder is the most economical grinder available. Designed for the farm who wants to process their own straw and hay. A number of contractors in the UK have started out with the H-1000 before moving up to the higher output H-1030 or the ultimate H-1130. Of course, to make the H-1000 affordable as an entry model, it’s limited on certain features, compared to other Haybuster models. The limited features include no tub tilt and a lighter-duty hammermill. This hammermill only requires a 100 hp PTO tractor and ideally a 140 hp tractor for its maximum efficiency. If your herd size and tractor size fit these criteria, this may be the tub grinder for you.
H1030 Tub Grinder
The latest introduction to the Haybuster PTO tub grinder family is the H-1030 model. It also has a 10’ tub and comes equipped with tub tilt and heavy-duty hammermill, that is located in the rear of the tub. It also has a dual-auger system to discharge material efficiently to the hydraulic folding stacking conveyor. The H-1030 requires a minimum of 150 hp up to 315 hp tractor. The newly designed electronic governor protects the tractor and machine from overloads, allowing the tub grinder to grind efficiently and consistently.
H1130 ‘Big Bite’ Tub Grinder
The H-1130 Big Bite tub grinder is Haybuster’s heavy-duty PTO grinder. It is designed with the features and the durability you need in a 11’ tub grinder. Some of these features include tub tilt, heavy hammermill with 1⁄2” plates and 1⁄2” hammers along with 1 1⁄4” rods, dual augers and a 26’ long stacking conveyor. The 315 hp drive system consists of an 8-groove belt/pulley system powered through a 77 series PTO driveline. The belt system tension is set at the factory and is designed to maintain its desired tension when stretching.
H1130 Electric Tub Grinder
The H-1130 Electric tub grinder has all the features of the PTO driven heavy-duty H-1130. It’s powered by two electric motors, a 300 hp motor that drives the hammermill and a 10 hp motor that powers the hydraulics. It is available with a variety of electrical packages.